Sawmill Creek Woodworking Community

Sections
Sawmill Creek News

Workshops

Woodturning

Social Woodworking

Tools

Lathes and Accessories

Table Saws and Accessories

Jigs and Fixtures

Cabinetry
Recent Articles
Recent Article Comments Widget
Hottest Threads

How to bend wood like this - Outdoor furniture project
Thread Starter: Alan Lightstone
Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Mike King Yesterday, 3:50 PM

Spindle gouge bevel angle?
Thread Starter: John Kananis
I have a 1/2" sorby detail gouge that I have ground at 40° (also removed the heel) and it works ok now that I moved away from the jigs and started sharpening by hand... but it's still just an ok tool. I now have a d-way detail spindle gouge (1/2") on the way and was thinking about trying a 25°...
Last Post By: Don Frank Today, 8:57 AM

Harvey Slider on Unisaw?
Thread Starter: John Kananis
All these slider threads got me thinking. Does anyone here have the Harvey compass st-1500 attached to their unisaw? Can you speak on the quality, ease of attachment, capabilities and shortcomings? Thank you in advance!
Last Post By: John Kananis Today, 10:40 AM

Powermatic Model 80 20" Bandsaw - Yes or No?
Thread Starter: Brent Ring
All, I have been in the market for a bigger bandsaw. Starting to build some rocking chairs a la Hal Taylor, and my PM 141 does not have enough clearance to make a few of the cuts needed. A Powermatic 80 20" had come up in my area, for a little under $1k. Owner states it runs smooth, cuts well....
Last Post By: Mickey Plunkett Today, 11:47 AM

Swiss Army ... tool
Thread Starter: Edward Weber
https://www.cnn.com/2024/05/07/business/swiss-army-knife-blade-scli-intl/index.html While I understand the decision, I can't help think that, I carry a pocket knife, with a blade only and use it for so many tasks. I think I would be fumbling through the selection of tools trying to find a...
Last Post By: Warren Lake Today, 12:10 PM

SCM T130 bearing change
Thread Starter: Tom Yaegle
Has any one here done one? Looking for suggestions, thanks.
Last Post By: Tom Yaegle Today, 11:54 AM

Michael Mules

There is no available content written by Michael Mules

Recent Polls
Would you borrow a tool from someone? (Votes: 71)

Sure - why not? (Votes: 9)

Never. If I needed something, I'd buy or rent it. (Votes: 10)

Maybe. Depends on the person and the tool. (Votes: 52)
Recent Forum Posts

Swiss Army ... tool

Up until a few years ago carried my keys this way with the Swiss knife I got in 84 in Venice. The red sides were broken off. Knife in my back pocket
Warren Lake Today, 12:10 PM

Glue Chairs

The best tip I ever got about gluing loose tenons in chairs was from a professional furniture repairman. He took an 1/8" drill bit and drilled from
Richard Coers Today, 12:06 PM

Sandblasting

First item is a huge air compressor. Sandblasting is like cutting the end off the hose and wanting the compressor to keep up. So many people think waiting
Richard Coers Today, 12:00 PM

SCM T130 bearing change

Warren, I could turn it over. It has a slider that would have to come off also.

SUCCESS,It was a pain in the hiney. 3' bar to get loose,
Tom Yaegle Today, 11:54 AM

Powermatic Model 80 20" Bandsaw - Yes or No?

Just bought a model 80 myself. Wondering about your restoration progress and where/if you found parts including the tension spring. My saw doesn't have
Mickey Plunkett Today, 11:47 AM
Recent Blog Posts

Sections

Recent Articles

Recent Article Comments Widget

Hottest Threads

Michael Mules

Recent Polls

Recent Forum Posts

Recent Blog Posts