Time for some levity

With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

MRI Question

My doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...

Graule ZS135 Radial Arm Saw voltage question

Recently purchased this Graule at auction in Germany, it went for cheap but import and shipping resolved that bargain aspect pretty quickly. I'm rather unsure of what the voltage is, the tags seem to be giving mixed signals. I wrote the company, but I expect it'll be a while before they provide...

Is there a small, accurate table saw?

I need to downsize my hobby woodworking shop a bit, and would like to have a table saw that is smaller than a cabinet saw with the extension table. Is there a smaller table saw that would still be as accurate as a cabinet saw? Most of the smaller saws are jobsite saws, and they don't seem to have a...

Looking for feedback before I buy an Avid CNC

Good day all. I appreciate the time to read and give feedback. I think this is the right machine and price, but want feedback. The time has come. I need a CNC to stay competitive and I also just want to create in new ways. I have “non-buyers remorse” for stopping bidding on a beautiful 5x10...

Township building codes.

Any one know what the reason why a metal gazebo needs to be at least ten feet from the house? Per township ordnance :confused:

sander dust collection

I personally think the mid range sanders will work decent with an good extractor hooked up. Purchasing a good quality dust extractor is the key to collecting

Epoxy glue joint opened

Never had a problem with Epoxy. On porous wood I do nothing to the edge, otherwise a little 120gr scuff is enough. I've even glued up thermally modified

Corded Circular Saws

Still would be worth a try though. That's the common "fix" for slowing saw brakes. I have a Porter Cable 447 that the brake gets tired on

Epoxy glue joint opened

I had same trouble once. Someone informed me that Acetone has OIL in it. If you want to use it , I would then clean the surfaces
with denatured

Epoxy glue joint opened

I'm going with John TenEyck and John Lanciani - rip and reglue.
I'm wary now of using epoxy again - might Titebond III work on this tropical wood?

SC Pig-Picking