Most of you probably know that I was one of the first to get the 18x47 G0698 lathe. I took time to do a review on the AAW forums, and it has been going on now for nearly two years. Lots of questions........lots of people interested in the lathe. [400 posts and over 35,000 views!] There were a couple of us who posted.........I think Steve Bellenger, and maybe one other........I am not sure. There were a couple of the Busy Bee owners and one from Australia about the Hare & Forbes version. Would owners of the G0698 consider posting in that thread about your impressions of the lathe, and how yours has performed for you since owning it. I think it is good to get a number of owners so as to give a picture that is not so heavily tilted with my own experience.........just thought it would be good if you would not mind taking the time. The thread is: Owners Poll 18x47 lathes Thanks
Thanks to David Stratton who posted on the AAW thread so far...........others are welcome to chime in with your impressions of the G0698.