View RSS Feed

Ben Arnott

My Shakashima Media Cabinet Part 3

Rate this Entry
Once the legs were in good shape, I moved onto the bottom rails (or stretchers if you want to think of it as a table for now). I drew out half a pattern on a piece of mdf. The reason I used a half pattern, is so if I flipped it, I knew it my whole pattern would be symmetrical. Once I had the rails traced out, I cut them out on the bandsaw and began smoothing them just as I did with the legs.

MC0U8140 (1).jpg MC0U8151.jpg

MC0U8154.jpg MC0U8163 (1).jpg

MC0U8175.jpg MC0U8197.jpg
Categories
Uncategorized

Comments