There is a person, that has designed very crazy looking squirrel houses. All kinds of fancy, moving parts, and such. He sells the plans to make these squirrel houses in print form, as pdf, and as dxf. He does not sell kits, nor parts. Plans only. Oh his policy page, he writes the following: ...
Last Post By: Thomas McCurnin Yesterday, 6:42 PMThis thread has no redeeming value. You have been warned. Got an ECE block plane here recently. Solely out of curiosity went I looking around, and found LV carries ECE planes, but not this one, but they do have replacement blades for it - which I will never need. Even so - I was pondering...
Last Post By: Rob Luter Today, 6:44 AMHi all, I have an older Delta 6" jointer model 37-190 which I've been trying to change the knife blades on (first time doing so). I penetrating oil on the knife bolts but 4 of the screw heads are starting to strip with the 5/16" open end wrench I've been using. I first tried using an 8mm...
Last Post By: Tom M King Today, 9:21 AMFor those of you who have a Festool Kapex, I suppose you've heard of the notorious motor failure problem. I had heard of it before I bought my Kapex in 2016, but I was feeling lucky and figured it wouldn’t happen to me. Well, it did. It’s a well-known problem and there’s a lot of...
Last Post By: Chris Parks Yesterday, 8:15 PMThis will be a "build" thread with a bit more detail than I've been doing lately, but it's an interesting project. Some might find it useful; some might scoff. :) But I just can't wait until the end to start posting because it would be too much to post all at once. -------- For background, our...
Last Post By: Jim Becker Yesterday, 12:55 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Yes, higher edge towards the cutting edge of the knives.
Tom M King Today, 9:21 AMIf I wasn’t all machined up, this would be a great excuse to go 3 phase on a J/P
https://shop.scmgroup.com/scmwood-na...p/FS41ES_COMP1
I installed a bunch of Lorex 4K cameras also. Very high quality cameras, but interface to see historical images is awful.
Alan Lightstone Today, 8:44 AMIt's for filling your gas tank when you use a gas can. Most nozzles will not go into the neck of your gas tank because of the trap door they have on
Steve Eure Today, 8:26 AMFor the travel socket sets in my truck, I use these Ernst twist to lock and release socket rails. In the mechanic shop I use the trays with vertical
Tom M King Today, 8:25 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 6:51 PM