Has been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Yesterday, 3:22 PMHello, I’m looking for advice and recommendations for a good plan or kit to construct a sailboat for a novice crew. My 10yo daughter went to sailing camp last summer and had a blast. It was a skills based camp that eventually leads to racing and ASA certification. They used what appeared to...
Last Post By: Maurice Mcmurry Yesterday, 8:31 PMMy router on the recently purchased router table quit, it came on then off then on now it will not come on. I have it pulled apart trying to get all the sawdust out of the connections, it's embedded pretty bad, not sure if that is the cause but worth a try. I found another identical one on eBay for...
Last Post By: chris hood Yesterday, 11:36 PMHow is the Margin Of Error determined for a survey? I don't care who does the survey or what it's for I'm just curious how the margin is determined and who determines it.
Last Post By: John C Cox Yesterday, 9:43 PMBeen watching Matteo for years and now many top players are recognizing him. I think hes 24 now. Video is not great and sound not great but I can hear whats going on. Very nice of Joe to bring him up and others that are spending time with him. Hes innovative. Very unique finger picking style....
Last Post By: George Speed Today, 10:14 AMI've made a few handles for some Japanese chisel hammers (gennou) ... all freehand. (Most artisan/blacksmith made gennou are sold as the head only, so
John McCrea Today, 10:58 AMDeWalt sued Porter-Cable not long after Porter Cable introduced their biscuit jointer. DeWalt claimed P-C violated one of DeWalt's patents in P-C's fence
Curt Harms Today, 10:50 AMI am building a driveway privacy gate for my daughter’s home. The large frame is 64x104” with 3x2 steel frame and splined redwood in-fill. The man gate
Jack Frederick Today, 10:45 AMIn this case the press fit is not overly tight, no heat needed - to remove. The opposite might not be true! Unlike the Bultaco Motor that went into
George Speed Today, 10:32 AMSolid surface guys use hot melt glue to hold clamping blocks and fixtures to the sheets. To remove the blocks and fixtures spritz the joint with alcohol.
Curt Harms Today, 10:30 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 4:23 PM