Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Joe Calhoon Today, 9:52 PMThere is a person, that has designed very crazy looking squirrel houses. All kinds of fancy, moving parts, and such. He sells the plans to make these squirrel houses in print form, as pdf, and as dxf. He does not sell kits, nor parts. Plans only. Oh his policy page, he writes the following: ...
Last Post By: Doug Garson Today, 8:36 PMAnswer = Tape
Last Post By: Mike Soaper Today, 8:13 PMI aim to finish these about the time the new master bedroom remodel completes. Otherwise they will clog up the shop until I have somewhere to put them. These are styled after the blanket chest I shared here which is part of the new bedroom suite. . . . . . Carcasses mainly done. ...
Last Post By: Mike Allen1010 Today, 2:05 PMStarted a project that requires 3 pieces each of maple, walnut, cherry, and padauk, 1/2" x 5" x 14". Used kiln dried boards ~4 foot long, 5/4 maple, 4/4 walnut, cherry, and padauk. I resawed the lumber to 9/16"~5/8". All of it except the cherry came out flat enough to crosscut and plane to size....
Last Post By: John C Cox Today, 8:02 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Thanks for the tips, especially the bandsaw small parts jig.
I have that same Craftsman bench vise; good solid design.
Thanks for all of your responses. I’m gonna read through them now.
Paint grade
So doors will be shakers and drawers will be shakers
I am wanting to build them start to finish. I do have a job site table saw but can’t imagine it being accurate enough for cabinets.
Justin Mullins Today, 10:09 PMIf still available I'll take the screwdrivers and Starrett square please.
James Tibbetts Today, 10:08 PMI’d encourage you to watch a video or read a description then just go do it. If you are used to sharpening planes and chisels, then it really isn’t
Ben Ellenberger Today, 10:04 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 7:07 PM