Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Derek Cohen Yesterday, 8:01 PMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Brian Elfert Yesterday, 8:31 AMRegulated season opened yesterday. Trip to Savannah, veered off the interstate to get some
Last Post By: Maurice Mcmurry Yesterday, 7:07 PMHi all, I have an older Delta 6" jointer model 37-190 which I've been trying to change the knife blades on (first time doing so). I penetrating oil on the knife bolts but 4 of the screw heads are starting to strip with the 5/16" open end wrench I've been using. I first tried using an 8mm...
Last Post By: mark ahlenius Yesterday, 6:50 PMApologies if this has been posted previously, but my search of the forum found nothing. I've been watching this series for a number of weeks now and found it fascinating. It covers the restoration/rebuilding of a 100 year old sailing yacht. The scale of the build is huge and I can't imagine the...
Last Post By: Maurice Mcmurry Yesterday, 9:44 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Tom wrote:
My family has grown Pine timber for generations. These days almost every timber grower produces it for minimum time before rotation.
Paul, where are you located?
Thanks.
Kevin
I did that on my lathe. But the setup and teardown is a problem. When you want to use a disk sander, you want to walk over to it and use it. If you
Mike Henderson Today, 12:28 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 5:24 PM