Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Kevin Jenness Today, 12:26 PMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Brian Elfert Today, 8:31 AMRegulated season opened yesterday. Trip to Savannah, veered off the interstate to get some
Last Post By: Maurice Mcmurry Today, 7:07 PMHi all, I have an older Delta 6" jointer model 37-190 which I've been trying to change the knife blades on (first time doing so). I penetrating oil on the knife bolts but 4 of the screw heads are starting to strip with the 5/16" open end wrench I've been using. I first tried using an 8mm...
Last Post By: mark ahlenius Today, 6:50 PMThis will be a "build" thread with a bit more detail than I've been doing lately, but it's an interesting project. Some might find it useful; some might scoff. :) But I just can't wait until the end to start posting because it would be too much to post all at once. -------- For background, our...
Last Post By: Jim Becker Yesterday, 8:03 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Vidalia GA sets the bar high!
The yellow ones are merely Vidaila type; Garnex Yellow F1, One of the varieties used in Vidalia County, GA
Very nice work Derek I had no doubt you could complete a chair that more then 95 % like the black ones. The slight difference I see isn’t worth mentioning.
Andrew Hughes Today, 6:59 PMHi yes, I have replaced the GFCI with a different brand and I’ve also tried it with different outlets in my shop. The problem still exists. I’ve got
mark ahlenius Today, 6:56 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Today, 5:24 PM