I was able to purchase 2 used Holtey Planes (earlier 98 series smoothers, not low angle) for an incredibly low price. The owner died. With the planes came 2 other blades that were not for those planes and I just stored them away. I am now on a mission to improve the performance of these fancy...
Last Post By: stephen thomas Today, 12:33 PMAfter reading all of the fine work by several members, I decided that I wanted to add the dust bin sensor to my Oneida Super Dust Gorilla. I ordered most of the parts on eBay. The sensor was $3.79, the delay relay board was $4.95 and the 12 V power supply was $9.99. I used some LED trailer...
Last Post By: Rod Sheridan Yesterday, 12:59 PMBack in February I posted some questions here about vinyl plank flooring for my basement. The house is only a few years old and the basement has a concrete floor. The climate in my area is very dry and there are no moisture issues in my basement. I've been doing some research and looking around...
Last Post By: Tom Bender Today, 9:07 AMIn a Master ( and only) Bathroom in the house...where all the wood cabinets are real wood...with raised panel doors.....these are to be changed over next.. Butt jointed corners, surrounding flat, plywood panels...20 coats+ of white paint ( Lead?) was supposed to be 4 doors here, until someone...
Last Post By: steven c newman Today, 11:26 AMI normally clean my Sawstop with WD40, then apply Boshield T9 and finally paste wax and this has been OK but not as good as I would like. I saw this video ( https://www.youtube.com/watch?v=v_HVA391T0E&t=10s ) and it sparked my interest so I watched a few others and read a few reviews which have...
Last Post By: Doug Rasmussen Today, 7:46 AMUntil it is falling apart and things fall out. (Votes: 34)
Until someone gives me a new on as a gift. (Votes: 5)
Whenever I feel like it. (Votes: 5)
I have many wallets and rotate them. (Votes: 0)
Don't carry a wallet. (Votes: 2)
I use a money clip instead. (Votes: 1)
I actually put a bunch of doors, end panels, and drawer fronts plus a face frame out last week for half a day to "sunbathe" in direct sunlight.
Jim Becker Today, 12:46 PMGonna make that one a sticky for the brain, Jimmy.
stephen thomas Today, 12:28 PMThank you John, for the first hand experience.
Are you saying you use the toothing iron for leveling in a 45 deg BD plane?
I might be inspired
Always used routers that turn in their base so just rotating them they go up or down. Sure adjustment is finer on the gizmos,
Warren Lake Today, 12:25 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 5:55 PM