Had a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Jimmy Harris Yesterday, 11:46 AMI've got a well head cabinet/enclosure to make which is in a remote location, about a 2 mile hike through the mountains without any trails. I've spent a few hours making measurements, and we will likely make this in sections, and strap them to our backs and assemble it in the field. There is no...
Last Post By: Thomas McCurnin Yesterday, 9:57 PMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Jim Becker Today, 9:05 AMSeems like the last decent option for a small bevel gauge at Blue Spruce is no longer available. Previously Vesper was the gold standard but he's no longer accepting orders. I use the Shinwa with the bottom locking screw and it's pretty good. I also ordered the folding Shinwa with the knurled...
Last Post By: Jim Koepke Yesterday, 7:01 PMOne of the things I enjoy about wood working is the potential to learn new skills that enhance my over all enjoyment of the craft. As a Neander, often these new skills don't require an extensive investment in new tools. I've been a hand tool wood worker for >40 years and early on everything...
Last Post By: Jim Koepke Yesterday, 4:13 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
It was me that recommended One-Time. For those unfamiliar with it, it's a penetrating acrylic that cures by UV light, not a film forming finish.
John TenEyck Today, 10:27 AMI have a canvas tool roll. I use it for traveling. I dislike it for normal use for 2 reasons: 1) it's dangerous with the edges up, but with the edges
Prashun Patel Today, 10:24 AMFree UPS and USPS shipping software | Pirate Ship
Pirate ship was recommended to me and worked very well for shipping a mortise attachment for a
[QUOTE=Rod Sheridan;3320627]Hi Brian, those look like cracks from the wood drying, which means the wood wasn’t dry enough when you made the table.
Brian Runau Today, 9:55 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Yesterday, 3:49 PM