Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Alan Lightstone Today, 10:21 AMI have a 2019 Grasshopper mower with Kubota D902 engine that suddenly won't start at low throttle. I have always started it at the lowest throttle setting and it started just fine. Now, it simply won't start at the lowest throttle setting. I thought something was seriously wrong, and I was just...
Last Post By: Brian Elfert Today, 8:31 AMThis thread has no redeeming value. You have been warned. Got an ECE block plane here recently. Solely out of curiosity went I looking around, and found LV carries ECE planes, but not this one, but they do have replacement blades for it - which I will never need. Even so - I was pondering...
Last Post By: steven c newman Yesterday, 3:01 PMRegulated season opened yesterday. Trip to Savannah, veered off the interstate to get some
Last Post By: Maurice Mcmurry Yesterday, 6:18 PMHi all, I have an older Delta 6" jointer model 37-190 which I've been trying to change the knife blades on (first time doing so). I penetrating oil on the knife bolts but 4 of the screw heads are starting to strip with the 5/16" open end wrench I've been using. I first tried using an 8mm...
Last Post By: mark ahlenius Today, 10:23 AMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
Hi, thanks for the reply.
These are the OEM blades from Delta. I am the only owner of this machine and I’ve never changed them.
I did
Sure. Happy to. I'd love to be able to do what you describe, but unless I'm missing something, it won't work with the size of the pieces I'm working
Alan Lightstone Today, 10:21 AMI have a 705 maybe 20 years old that has been used quite a bit but is still tight, square and powerful. In a box connected to a shop vac the dust collection
Robert M Richardson Today, 10:18 AMThanks a lot -- I am going to check that out. I talked to some local cabinet shop s few years ago but they saw this as a profit opportunity and almost
Johannes Becker Today, 10:15 AMYes Mike, it's a good strong looking machine. Runs great, no issues. But I like to have background information on a machine if I can get it.
Mark Gibney Today, 9:54 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Cameron Wood Yesterday, 2:54 PM