This thread has no redeeming value. You have been warned. Got an ECE block plane here recently. Solely out of curiosity went I looking around, and found LV carries ECE planes, but not this one, but they do have replacement blades for it - which I will never need. Even so - I was pondering...
Last Post By: steven c newman Yesterday, 2:19 PMFor those of you who have a Festool Kapex, I suppose you've heard of the notorious motor failure problem. I had heard of it before I bought my Kapex in 2016, but I was feeling lucky and figured it wouldn’t happen to me. Well, it did. It’s a well-known problem and there’s a lot of...
Last Post By: Ken Fitzgerald Yesterday, 9:45 PMHi all, I have an older Delta 6" jointer model 37-190 which I've been trying to change the knife blades on (first time doing so). I penetrating oil on the knife bolts but 4 of the screw heads are starting to strip with the 5/16" open end wrench I've been using. I first tried using an 8mm...
Last Post By: Tom M King Yesterday, 9:21 AMFed up with Nambi Pambi safe for the environment stuff and have been for a long time. I have weeds and other things growing around and behind my shed and else where, I just want it All Gone. I can buy the Ortho Ground Clear and it takes 24 Oz of the stuff to a gallon of water and the jug is $42...
Last Post By: Tom M King Today, 8:15 AMThis will be a "build" thread with a bit more detail than I've been doing lately, but it's an interesting project. Some might find it useful; some might scoff. :) But I just can't wait until the end to start posting because it would be too much to post all at once. -------- For background, our...
Last Post By: Jim Becker Yesterday, 10:45 AMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I agree with David. I believe that's a very nice buy for what sounds like a sturdy DP and you'll also be helping out a local deal with an unfortunate
Jim Becker Today, 8:42 AMAmber Bulls Eye is waxy shellac. Zinsser Seal Coat is wax free. If you need more color, it can also be tinted with and dye that's alcohol soluble.
Jim Becker Today, 8:34 AMI havent had issues with non locking casters as there is a belt.
I do have issues with the laguna casters not turning to roll machine. Im
https://www.atlas-machinery.com/pica.../pica-7032-sb/
Atlas is pricey but they get Pica stuff first
I used those for a long time, but one particular one that some sockets came on was very difficult to get the sockets on and off of. That's when I tried
Tom M King Today, 8:17 AM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Yesterday, 2:14 PM