Has been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: steven c newman Yesterday, 4:57 PMSaw this today while reading a story about the prospect of electrical distribution networks failing due to heat: When I mentioned to Candy that transformers don't "slow down" high voltage, but "step down" high-voltage to a lower voltage, she said, "it's just semantics." Though it seems...
Last Post By: John C Cox Today, 11:27 AMAccording to the book I'm reading (What If ? 2 by Randall Munroe) The second programmable computer, UNIVAC was the size of a room, made in 1951 from vacuum tubes. If the same machine was made from Iphone chips today, they could be imbedded in a single grain of salt.
Last Post By: Alan Rutherford Yesterday, 9:40 PMLooking to upgrade from my old 6" Jet JJ-6cs jointer (which I put a helical head on). I just have a hobby shop for personal use but would like to get an 8" jointer since I find the 6" too small. I've for the most part settled on Grizzly for their affordability and overall good reviews. G0490ZX:...
Last Post By: Warren Lake Today, 10:23 AMHad a 7.5 baldor, had a seperate post on this because I thought I figured out what was going on but evidently this is beyond my knowledge or experience. I replaced caps on 7.5 baldor, no difference, bought new leeson 7.5 hp, both single phase motors, got it hooked up, check wiring, cranked...
Last Post By: Karl Card Today, 2:15 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I caught a ball on the end of my thumb, ouch, this is going to be vulnerable for quite some time.
I made this little guard
What kind of switch? Simple on/off or remote push button station. Unplug: Simple, check continuity when "ON". Contactor, check stop circuit
Bill Dufour Today, 4:04 PMYou can buy 4'x10' birch plywood. No idea where you are located, but here is a couple of distributors that have it. https://detering.com/product/3-4-d3-birch-4x10-plywood/
Richard Coers Today, 3:59 PMYou have to write down on a piece of paper and tie it to your wrist before you head down to the shop. Now if the pencil is down in the shop, you're screwed.
Doug Garson Today, 3:56 PMI need a screwdriver from the shop (downstairs) clomp clomp clomp clomp
What did I come down here for?
Back upstairs clomp
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 4:47 PM