This thread has no redeeming value. You have been warned. Got an ECE block plane here recently. Solely out of curiosity went I looking around, and found LV carries ECE planes, but not this one, but they do have replacement blades for it - which I will never need. Even so - I was pondering...
Last Post By: Warren Mickley Today, 11:39 AMRegulated season opened yesterday. Trip to Savannah, veered off the interstate to get some
Last Post By: Maurice Mcmurry Today, 3:46 AMHi all, I have an older Delta 6" jointer model 37-190 which I've been trying to change the knife blades on (first time doing so). I penetrating oil on the knife bolts but 4 of the screw heads are starting to strip with the 5/16" open end wrench I've been using. I first tried using an 8mm...
Last Post By: Warren Lake Today, 2:10 PMFor those of you who have a Festool Kapex, I suppose you've heard of the notorious motor failure problem. I had heard of it before I bought my Kapex in 2016, but I was feeling lucky and figured it wouldn’t happen to me. Well, it did. It’s a well-known problem and there’s a lot of...
Last Post By: Mike Henderson Today, 3:11 PMThis will be a "build" thread with a bit more detail than I've been doing lately, but it's an interesting project. Some might find it useful; some might scoff. :) But I just can't wait until the end to start posting because it would be too much to post all at once. -------- For background, our...
Last Post By: Jim Becker Today, 12:55 PMBeen doing it like (or equivalent) this for years. (Votes: 4)
Wow! Never thought of that. (Votes: 0)
Been doing it with mirrors. (Votes: 2)
Ain't got a boat, truck, care… (Votes: 0)
I have a 2021 Ford Ranger, I found this under one of the back seats, anyone know?
I'll compare them when I get the new parts and let you know if I see any differences. However, I do believe that most people and companies act rationally.
Mike Henderson Today, 3:11 PMYes, Unforunaately I need to downsize.
Andrew Prandoni Today, 2:45 PMBrian, I think of it like this (made up numbers below).
Let's say a Walmart can do a maximum of $1M / month in sales through their in-store
Hello,
I'm building my first French Style Worbench based on Schwarz design.
I've always had a main doubt about the deadman.
Considering
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Yesterday, 11:38 PM