There is a person, that has designed very crazy looking squirrel houses. All kinds of fancy, moving parts, and such. He sells the plans to make these squirrel houses in print form, as pdf, and as dxf. He does not sell kits, nor parts. Plans only. Oh his policy page, he writes the following: ...
Last Post By: Thomas McCurnin Yesterday, 6:42 PMThis thread has no redeeming value. You have been warned. Got an ECE block plane here recently. Solely out of curiosity went I looking around, and found LV carries ECE planes, but not this one, but they do have replacement blades for it - which I will never need. Even so - I was pondering...
Last Post By: stephen thomas Yesterday, 11:31 PMFor those of you who have a Festool Kapex, I suppose you've heard of the notorious motor failure problem. I had heard of it before I bought my Kapex in 2016, but I was feeling lucky and figured it wouldn’t happen to me. Well, it did. It’s a well-known problem and there’s a lot of...
Last Post By: Chris Parks Yesterday, 8:15 PMHi all, I have an older Delta 6" jointer model 37-190 which I've been trying to change the knife blades on (first time doing so). I penetrating oil on the knife bolts but 4 of the screw heads are starting to strip with the 5/16" open end wrench I've been using. I first tried using an 8mm...
Last Post By: mark ahlenius Yesterday, 11:42 PMThis will be a "build" thread with a bit more detail than I've been doing lately, but it's an interesting project. Some might find it useful; some might scoff. :) But I just can't wait until the end to start posting because it would be too much to post all at once. -------- For background, our...
Last Post By: Jim Becker Yesterday, 12:55 PMThank you Jim.
I see here and there that some people screw in the 45 guide for future removal or substitution.
Anyway, making it nearly
Thanks all!
I think the slot cutter route seems the most attractive to me, certainly I could see a set having many uses over and above this
Thanks Warren!
mark ahlenius Yesterday, 11:42 PMHi
I bought my machine back in ~1997 or so. Manual was printed in 1996. All 12 of the bolts in mine had Hex heads and the thread was 1/4-28.
That is just sloppy thinking from a privileged point of view:
Egyptians were working some of them 4,000 yrs ago.
We clearly do not need steel
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Yesterday, 6:51 PM