With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Allen Today, 6:44 PMDo you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
Last Post By: Warren Lake Today, 12:35 PMFor those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...
Last Post By: Michael Burnside Today, 1:15 PMI had the high bid tonight on this Rockwell/Delta 28-350. I've been looking for and bidding on these for the last few years, and I was the back bidder a few times, but this one went for a very good price. My reserve bid was $600. It's possible that there's something terribly wrong with it, but...
Last Post By: Jim Becker Today, 9:43 AMhas anyone done a cope and stick micro/skinny shaker setup, or is the consensus that it's always a miter wrap? i talked to Great Lakes a while back, and they hadn't seen it (or at least my rep hadn't), curious what others have done. i would much, much rather make them on the shaper than at the...
Last Post By: Maurice Mcmurry Today, 7:17 PMI will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....
Last Post By: Malcolm Schweizer Today, 3:36 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 9)
Maybe. Depends on the person and the tool. (Votes: 49)
Thanks Kevin Jenness! the Shaker Legacy is a remarkable book. I have looked at all of the pictures and read a few paragraphs. I had previously read about
Maurice Mcmurry Today, 7:17 PMI've been using the 5 cut method from William Ng's website. Started with about .033. Was getting distracted with an empty belly that knew it was later
Jerry Bruette Today, 7:14 PMIt's very simple to get your sled's fence even more precise.
Look for Scott Walsh's videos on youtube. Find the one where he demonstrates
Logged into the site to look something up. On the way, clicked on an Off Topic post and starting reading. Forgot what I logged in for originally.
Kris Cook Today, 6:44 PM
vBulletin Message