• Recent Articles

  • Hottest Threads

    Patrick Walsh

    Vintage Martin T75 restoration

    Thread Starter: Patrick Walsh

    So I have a opportunity to purchase the above machine for a fair deal from my employer. I am aware of the phenolic guides being pop riveted I the the sliding table along with not availible for replacement. So my question is as follows to those in the know with regard to the phenolic ways....

    Last Post By: Patrick Walsh Today, 6:42 PM Go to last post
    phil harold

    Clear Vue Cyclone...

    Thread Starter: phil harold

    Got Bashed in Wood Magazine march2014 page 74 After they tested it they stated it returned 20 times more dust than the oneida tested a year ago Clear Vue returned more dust to particles then five single stage collectors tested last year Ouch Was there test wrong? or All the hype on...

    Last Post By: Art Mann Today, 7:33 PM Go to last post
    david charlesworth

    There's nothing wrong with A2

    Thread Starter: david charlesworth

    I frequently hear that A2 is difficult to sharpen with a wire edge which hangs on. My sharpening method is very simple. Get a small wire edge at 30 or 33 degrees . An Eclipse honing guide is used, with an 800 grit man made Waterstone. The angle is then raised by about 2-3 degrees Now 4...

    Last Post By: Warren Mickley Today, 7:27 PM Go to last post
    Bryce Walter

    Chisel sharpening - difficulties

    Thread Starter: Bryce Walter

    I'm a novice and am looking for insight into what I'm doing wrong. I'm using the Veritas Mk II sharpening jig. After flattening the back, I'm setting a 25 degree bevel first on the 300 and then 1000 stone. When I go to do the micro-bevel it's clear that something is not straight based on the...

    Last Post By: Brian Hale Today, 6:15 PM Go to last post
    Steven Mikes

    Do you wear an apron while working?

    Thread Starter: Steven Mikes

    Wondering if its worth getting one. Seems like it could keep some dust off the clothes, but that usually brushes off quite readily. The pockets might be helpful just for holding small things like marking knife, pencil, small ruler, square, etc. There must be a reason why traditional woodworkers...

    Last Post By: Bill Jobe Today, 5:05 PM Go to last post
    Dave Rosner

    Big table....big boards...

    Thread Starter: Dave Rosner

    Hi all - Im building a 112 x 44 walnut dining table with 10/4 boards for the top. Im having a heck of a time running the 7-11 boards through my 8 jointer an 12 planner. Im using the method of partially flattening 8 of the face and then running through my planner using a base that supports...

    Last Post By: Mark Bolton Today, 3:52 PM Go to last post
  • Using CA Glue in Woodturning

    There have been some recent threads on CA glue on the Turners forum. The following is an article I did for my turning club website on CA glue after doing some research......

    CA Glue The Woodturners Friend.....

    By Wally Dickerman

    Cyanoacrylate Glue, commonly called CA glue is used by woodturners for a variety of reasons. To attach glue blocks, to fill voids and cracks, to attach collars to hollowforms, to firm up bark on natural edge bowls, as a durable finish for pens, bowls, bottle stoppers and more.

    CA glue works well to bond wet wood. Yellow and white glues do not. For that reason CA is almost universally used to attach glue blocks to bowl blanks.

    Not all CA glues are equal. I stick with the glue brands that are sold in woodworking stores rather than those sold in craft stores. CA comes in several forms. Thin, medium and thick. It comes in black and in flexible.

    According to one manufacturer, unopened CA has about a one year shelf life at room temperatures. If stored in a freezer that shelf life is doubled. I've found that opened CA has a life of 5 or 6 months. I live in a dry climate. In a very humid climate it might be less. When I buy CA I put the date on it and put it in the freezer. When I open a container I put that date on it. After about six months I toss it. I want CA to be at it's full strength when I use it.

    Shelf life of Opened CA stored at temperatures higher than 80 will be shorter.

    Do not store opened CA in a refrigerator or freezer. Moisture in the air will shorten it's life.

    Always wear glasses when using CA. The moisture in our eyes causes instant bonding.

    When filling large cracks or voids it's best to apply CA in layers using an accelerator between layers. The CA has a better chance to cure.

    The fumes from CA glue are potentially harmful to your health so it's a good idea to use it in a well ventilated area.

    Cotton and CA used together causes a chemical reaction creating heat and toxic smoke, so don't use cotton cloth or swabs to apply CA.

    CA does not adhere to glass.

    As opened CA ages, it sometimes thickens. Thin CA can be added to medium and thick CA.

    When I open a new CA container I toss the cap. I find that I get fewer plugged spouts and it doesn't seem to affect the life of the glue. Acetone is a debonder. I keep a small glass jar handy and when I get a plugged spout I put it in the jar. After I've collected a few I cover the spouts with acetone. In 24 hours the spouts are all clean. I keep some on hand to replace clogged spouts. Debonders are available and I keep a bottle on hand. When using CA I seem to usually get some on my fingers. The debonder helps to remove it.

    When using CA to fill voids and cracks it tends to stain the area around the crack, especially when using thin glue. In order to eliminate that probability, I apply some brushing lacquer to the area. It seals the wood, avoiding stain.

    Moisture is an accelerator so when CA is used on wet wood it will set up faster. I find that using the accelerator sold in spray cans is the most convenient to use.
    Comments 3 Comments
    1. max taylor's Avatar
      max taylor -
      I also coat my hands with paste wax, and when thru w`ipe it off. no sticky fingers. Max
    1. alan miller's Avatar
      alan miller -
      Wow,great article Wally.I learned a bunch.Thanks
    1. Pat Foy's Avatar
      Pat Foy -
      Best summary of CA characteristics I've read. Thanks.
      Pat