With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Jim Koepke Today, 1:36 AMDo you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...
Last Post By: Edward Weber Today, 2:41 PMFor those of you who've built a shop, how much value did it add to the property? For instance, if a shop costs $150k, can the property value increase the same? Less? More? I know there's many variables. Thought maybe some of you have been through this, having built a shop then had property value...
Last Post By: Robert Hayward Today, 8:03 PMMy doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...
Last Post By: Mike Henderson Today, 10:52 PMHot water travels about 60 feet from the tank to our upstairs bathroom and it takes too long to get there. I'm thinking about installing a point-of-use heater with a mini-tank but don't know if it will do what I want. Can I install a 2.5 gallon POU heater in the hot water supply to the bathroom and...
Last Post By: Mike Henderson Today, 6:44 PMI will do a video once we get the 3-phase wired up, but here is how big the 24” 7.5hp Grizzly bandsaw is. No photos I found online really showed the true size. For anyone wondering if it will fit in the shop- it is 83.5” tall. The crate adds about 6” (4” pallet and 2” additional crate height.)....
Last Post By: Curt Harms Today, 9:52 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 51)
My father also died too soon, but he smoked and didn't really take care of his health. I've survived long past his death age.
Mike
Ng's the man. steps are easy to follow, sled is accurate. Every stage of squareness matters. Plus, he’s goofy.
Splurge and use high
If you get tired of waiting, consider a PEC 6 inch combination square. I found a blem here.
My experience with PEC blem tools has been very
I feel like I should chip in for the cost you have in the finish you two have convinced me to stay away from. Many thanks!
Tom M King Today, 9:58 PM
vBulletin Message