With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Cameron Wood Today, 1:48 PMLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Alan Lightstone Today, 1:07 PMMy doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...
Last Post By: Ken Fitzgerald Yesterday, 9:50 PMRecently purchased this Graule at auction in Germany, it went for cheap but import and shipping resolved that bargain aspect pretty quickly. I'm rather unsure of what the voltage is, the tags seem to be giving mixed signals. I wrote the company, but I expect it'll be a while before they provide...
Last Post By: Brian Holcombe Today, 1:17 PMI need to downsize my hobby woodworking shop a bit, and would like to have a table saw that is smaller than a cabinet saw with the extension table. Is there a smaller table saw that would still be as accurate as a cabinet saw? Most of the smaller saws are jobsite saws, and they don't seem to have a...
Last Post By: Warren Lake Today, 2:24 PMGood day all. I appreciate the time to read and give feedback. I think this is the right machine and price, but want feedback. The time has come. I need a CNC to stay competitive and I also just want to create in new ways. I have “non-buyers remorse” for stopping bidding on a beautiful 5x10...
Last Post By: David Buchhauser Today, 8:28 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
I once thought like you and picked up a cheap 14" cast iron BS and put a riser block on it so I could cut blanks for turning bowls. It was slow
Alex Zeller Today, 5:32 PMYou've asked for a saw that doesn't exist, on the one hand the bare minimum, on the other something that you won't feel you need to upgrade from later.
John TenEyck Today, 5:31 PMI get distracted way too easily. When I'm after something important I repeat it in my head a few times as I start after it.
Sadly, it's
What is the reason wire nuts should not be reused? Even if it comes off cleanly it shouldn't be reused?
Dave Zellers Today, 5:19 PMUnless you can clamp it closed, re-rip and re-glue it
Thomas McCurnin Today, 5:14 PM
vBulletin Message