Looking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Mike King Today, 3:50 PMMy landscape guys clean up the beds and install mulch for me now, too old, but I planted everything you see except the very large mature trees. Shade garden, cutting garden, front. Thanks Brian
Last Post By: Brian Runau Today, 1:07 PMHas any one here done one? Looking for suggestions, thanks.
Last Post By: Jerry Bruette Today, 1:23 PMOpinions, please on integrated arbor and chuck for a DP. Am looking at the LLAMBRICH Keyless chucks ... integrated 2MT shank/arbor 1/32" to 3/8" (part# JK10-MT2) 1/32" to 1/2" (JK13-MT2) Thanks
Last Post By: Patty Hann Today, 1:45 PMHas been restocked.. Bought 10 planks...for $30...had to cut a few of the 10 footers down, to fit into the Trunk of my Chevy Equinox... Eight 1 x 6 x 6' Five 1 x 4 x 6' And he threw in a stack of shorts And a 3/4" x 8" x 39" slab..
Last Post By: Mike Manning Today, 4:38 PMI have a Gitzo tripod that was bought in the late 1970s. The rubber ring for tightening the nut on the telescoping section to raise and lower the camera has finally stretched to the point of uselessness. Years ago when talking to a rep. at Gitzo I was told the part is unavailable and my model...
Last Post By: George Yetka Today, 4:49 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
https://www.mikestools.com/download/...als/37-150.pdf
It would appear from the manual that the original pulley set up yielded
I designed an aluminum insert for my Craftsman saw. A machinist friend milled it for me. The only time I have to hold it down is when I am cutting up
Lee Schierer Today, 5:18 PMFor many years we had a tradition of cutting dow the family Christmas tree with the saw that some Swiss Army knives have. My favorite Victorinox had one
Maurice Mcmurry Today, 5:08 PMI disassemble as much as possible, clean out the joints and tenons. For reassembly I make some long shavings out of oak. I apply glue to the tenon
Lee Schierer Today, 5:07 PMModern folks only need to open Amazon packages, and they use a key.
Cameron Wood Today, 4:53 PM
vBulletin Message