With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Today, 3:08 PMLooking for a new project to do. I've been spending a few months upgrading the workshop / fixing minor annoyances, and really need to actually build something. I ran across this in a magazine ad. The furniture is supposedly solid teak, though I don't think that will be in the cards for...
Last Post By: Mike King Today, 8:10 AMMy doc tells me I need an neck MRI to diagnose some arm pain that may be starting in the neck. On the phone the MRI facility asked me if I had ever been involved with "metal grinding". Of course as a woodworker I've sharpened tools on a wheel, drilled holes in metal etc. I'm hoping to get more...
Last Post By: Patty Hann Today, 12:23 AMHere's one I've been going over for the last 6 months. We have sliding pocket doors that separate our dining room and our family room. There are two of them 30 inches wide and they meet in the middle to form one 60 inch opening when open and a solid "wall" when closed. When they are open,...
Last Post By: Tom Bender Today, 8:50 AMAt least one that looks better than this? I think I can build something a little bit better than that plastic blister pack... Maybe take a plan from Paul Sellers Masterclasses, and build a case? and.. Will have to change a couple sizes...
Last Post By: steven c newman Yesterday, 9:30 PMI just ordered a dozen pencil sharpeners for 12$ from Amazon. These should last me through the small project I have on the back burner.:D
Last Post By: Paul Saffold Today, 8:09 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Well I got the sled dialed in the other day. I used the 5 cut method. I like it because after doing the math it tells me how far and which way to move
Jerry Bruette Today, 5:10 PMI would de-energize the circuit. Then check each and every device known to be on that circuit to see if any are still energized. If so de-energize that
Lee Schierer Today, 4:53 PMAbsolutely not, but quality? Brian
Brian Runau Today, 4:53 PMA broken, or disconnected neutral wire will cause portions of the the neutral circuit to be energized.
Regards, Rod.
I think you can't build it for anywhere near that money.
John
vBulletin Message