• Recent Articles

  • Hottest Threads

    Dave Anderson NH

    Time for some levity

    Thread Starter: Dave Anderson NH

    With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

    Last Post By: Ed Aumiller Yesterday, 8:41 PM Go to last post
    dennis thompson

    Stock market😰

    Thread Starter: dennis thompson

    Im hanging in there so far,but its surely painful. Ive moved some money from technology to less volatile investments but there really is no place to hide, maybe cash, but you know what they say about market timing. What are you doing?

    Last Post By: Thomas McCurnin Yesterday, 11:58 PM Go to last post
    Bruce Wrenn

    In The Grocery Section, Disappearing Store Brands

    Thread Starter: Bruce Wrenn

    Recently (in the last year,) I have noticed more and more "store brands" disappearing from the shelves. The stores where I regularly shop (excluding Aldi's) now only have Campbell's soup. Walmart has a very limited selection of their in house "Great Value" brand soup. Same goes for oatmeal, only...

    Last Post By: Lee DeRaud Yesterday, 9:18 PM Go to last post
    Steve Mathews

    Need for crosscut sled?

    Thread Starter: Steve Mathews

    After watching the video below I'm questioning the need for my crosscut sled. It seems that mine rarely gets used in favor of an Incra miter gauge, which I find easier to handle than the bulky and heavier crosscut sled. The only complaint with the miter gauge is it doesn't stay square or at least...

    Last Post By: Wes Grass Yesterday, 9:48 PM Go to last post
    Joseph Mazey

    LagunaP12 vs. Felder K3

    Thread Starter: Joseph Mazey

    I imagine the sliding table saw topics have been seriously beaten up on here. I am after more of am i comparing apples to apples here. Have an online business. Currently have a Grizzy hybrid cabinet saw and cut a lot of 1/4" MDF core white melamine. If there is a mealmine blade in existence i...

    Last Post By: Jim Becker Yesterday, 1:13 PM Go to last post
    Steve Demuth

    MillRight?

    Thread Starter: Steve Demuth

    Anyone here have experience or otherwise informed thoughts on the Millright CNC woodworking machines, and in particular, the Power Route Plus? From the marketing material, this looks like a well built machine that should have good rigidity, accuracy and repeatability, for a reasonable price. ...

    Last Post By: Steve Demuth Yesterday, 6:20 PM Go to last post
  • Aluminum Handles for new Thompson tools

    I recently ordered a few new gouges from Thompson Tools. Doug is a great guy to deal with and I will definitely order from him again. Since Im on a tight budget and needed handles for my new tools, I decided to build my own. At first I was going to make some nice wood handles but then I thought aluminum would look nice.



    The ends of the tools were machined to 1/2 and 3/8 respectively so I needed something with a 1/2 ID. After a little searching, I found some 1 diameter aluminum tubing with .25wall thickness at speedymetals.com. It came in 12 and 18 lengths so I ordered a few of each.

    Here is a list of what materials I used:

    - Aluminum tubing (1 dia, .25 wall thickness x desired length)
    - (2) 1/4-20 x 1/4 long set screws (I used 3/8 long set screws for the 3/8 handle)
    - 1-1/4 OD x 1 ID clear tubing (available in the plumbing dept at most BORGs)
    - 1/2 dia steel tube (in the welding material section at the BORG)

    Here is a price list:

    - Aluminum tubing (18-$5.71, 12-$3.78)
    - Set screws ($.29 each)
    - Steel tube ($5.75)
    - Clear tubing ($1.25/ft)



    I got started by making handles for the 1/2 tools. First, I marked the tube with where I wanted to put the set screws. Then I used a center punch to mark the holes.



    To drill the holes I used a small pilot hole and then changed the bit to 13/64.



    Then I tapped the holes using my 1/4-20 tap. Its not perfect but it will work!



    Now its time to test fit the handle to the tool. Perfect fit!



    I could have left the aluminum as is but I wanted it to look nice. Using a chuck and a 60 degree live center I mounted the handle in my lathe and polished it up using sand paper. I used 150 grit and then just jumped up to 400 grit because I wasnt too concerned about a perfect finish. You can see how much nicer the finished handle looks in this picture.





    Not wanting any sharp edges, I used my oscillating belt sander and squared up the tubing. Then I put a 45 degree bevel on each end.



    At this point I could have called it a finished tool handle but it felt a little small in my hand. I thought of options for making the handle bigger. Here are a few options: leather grip for an aluminum softball bat, friction tape for hockey sticks, or clear plastic tubing, etc. Obviously I chose the clear plastic tubing! It was a fairly tight fit but I managed to slide it on as far as I needed. Then I trimmed the excess with a sharp utility knife.



    Thats it for the 1/2 handles. Now on to the 3/8 detail gouge. Using the same aluminum tubing, I just had to make a little sleeve to fit the smaller diameter gouge. Fortunately, the 1/2 steel weldable tube fit the bill perfectly. It fit inside the aluminum handle and the gouge fit inside the steel. I also used 3/8 long set screws for this handle because I wanted them to make good contact with the gouge.

    I marked the locations.



    Then I drilled holes large enough to not cause any interference with the set screws. After I drilled the holes, I cut off the steel tube so it was just long enough to support the tang on the gouge (I just used the mark just to the left of the new holes).



    Now for the hard part: pounding the steel tubing into the aluminum handle! It took some muscle but I finally got it. Then I ran the end on the sander again to make it even.



    Viola! Three finished handles for about $20 and an hour of labor!



    Now I havent had a chance to use them but they feel pretty good in my hands. The balance seems good right now but I can always add a little weight with bb's, bird shot or by inserting some steel rod in them.
    Comments 4 Comments
    1. George Clark's Avatar
      George Clark -
      Great tutorial, Doug. Thanks for posting. George
    1. Joel Watson's Avatar
      Joel Watson -
      Nice step-by-step. Thanks for sharing cost and how long it took.
    1. John Fabre's Avatar
      John Fabre -
      I really enjoyed that, thanks.
    1. Mike Stephens's Avatar
      Mike Stephens -
      Thanks for posting. Great article.