With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Patty Hann Today, 9:14 AMI'm a hobbyist on a limited budget looking for a bandsaw, primarily for resawing. Let's say, 12" of 8/4 hard maple cut down the middle would be the maximum I would ever ask of it. I'm under the impression that I'll need a steel framed bandsaw for that. What else do I need to know? Are guides...
Last Post By: Tom Trees Yesterday, 10:22 PMI need a bumper sticker that says 'Nobody on board'. Tesla has opened up the 'self driving' app on newer Tesla's for a free 30 day trial. It is factory installed on all of them, they just don't turn it on unless you pay, which we didn't. All of a sudden there is an octogenarian who cannot...
Last Post By: Rick Potter Today, 5:09 AMThey are going crazy building standalone car washes in my area. I know of at least three currently under construction nearby, and a few others that recently opened. Car washes are going up all over the Minneapolis metro area. There will easily be three times as many standalone car washes once...
Last Post By: Warren Lake Today, 9:08 AMI have a 1/2" sorby detail gouge that I have ground at 40° (also removed the heel) and it works ok now that I moved away from the jigs and started sharpening by hand... but it's still just an ok tool. I now have a d-way detail spindle gouge (1/2") on the way and was thinking about trying a 25°...
Last Post By: John Kananis Today, 2:16 PMAll these slider threads got me thinking. Does anyone here have the Harvey compass st-1500 attached to their unisaw? Can you speak on the quality, ease of attachment, capabilities and shortcomings? Thank you in advance!
Last Post By: Troy Gamm Today, 2:51 PMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Making Crispy Ash Noodles..yum..
about every 3 pass, rub a bit of wax along the groove...tight squeeze..
Had to make sure
My goggle came up with a Grob T120tp plane. I do not think it is the same Grob still making bandsaws in Wisconsin. Unlike many here I donot really know
Bill Dufour Today, 6:17 PMDuring the Lay out..
Decided to see what one side of the chest will look like...8 raised panels...to match the 8 drawers this will have..2"
We have the Llambrich JK13-MT2 check on the Jet JDP-17 drill press in our community woodworking shop. Like Michael Burnside above, we absolutely love
Rush Paul Today, 5:57 PMSince one end looked the best, I started there,
Just hold them square...use one of the 2" wide rails...mark where the tenon meets
vBulletin Message