I have these two raised panel garage doors to refinish on a lake rental house. Just testing a couple of panels, it won't be too bad sanding down to bare wood, but someone had put another coat of marine varnish on the bottom two sections, so those are going to get some work with a heat gun before...
Last Post By: Tom M King Today, 5:28 PMI have a 1/2" sorby detail gouge that I have ground at 40° (also removed the heel) and it works ok now that I moved away from the jigs and started sharpening by hand... but it's still just an ok tool. I now have a d-way detail spindle gouge (1/2") on the way and was thinking about trying a 25°...
Last Post By: Don Frank Today, 8:57 AMAll these slider threads got me thinking. Does anyone here have the Harvey compass st-1500 attached to their unisaw? Can you speak on the quality, ease of attachment, capabilities and shortcomings? Thank you in advance!
Last Post By: John Kananis Today, 10:40 AMHas any one here done one? Looking for suggestions, thanks.
Last Post By: Jerry Bruette Today, 5:56 PMI used to feel frustrated when I would have listed something for sale on Craigslist or Facebook and included the town where I lived, and instead of looking it up on their devices people would write to me to ask "where is Orwell" (where I used to live) or now "where is Piercefield?". I finally...
Last Post By: Larry Edgerton Today, 5:50 PMAll, I have been in the market for a bigger bandsaw. Starting to build some rocking chairs a la Hal Taylor, and my PM 141 does not have enough clearance to make a few of the cuts needed. A Powermatic 80 20" had come up in my area, for a little under $1k. Owner states it runs smooth, cuts well....
Last Post By: Mickey Plunkett Today, 11:47 AMSure - why not? (Votes: 9)
Never. If I needed something, I'd buy or rent it. (Votes: 10)
Maybe. Depends on the person and the tool. (Votes: 52)
Warren, I have a laptop for traveling, and one I use at home. There is no real financial information in the travel one, but there is some fake bank accounts
Larry Edgerton Today, 5:56 PMGlad to see you got the nut off, and the spindle cartridge out.
Picture of the nut is a little blurry, is that a nyloc nut or is there some type
Thanks Keith, they make it hard to find a part for an older model from when instead of numbers they used marketing names.
Found some similar
I agree. One, I can tell a lot about people with a simple conversation. Two, if I request they call and they do not, I can safely blow them off because
Larry Edgerton Today, 5:50 PMDitto. I think some people just use it for entertainment. I HATE selling stuff. And apparently the word firm has lost its meaning. If I have a "firm"
Larry Edgerton Today, 5:42 PM
vBulletin Message