I am hoping there might be some SD residents here, or maybe others who know the state? I'm sorting through my options of finding a suitable place to relocate to and retire within the next 24 months. I have lived all over the country, but my driver's license has been AK since I first got it. I...
Last Post By: Michael Drew Yesterday, 8:37 PMThere are dogs in the world and sometimes they attack. That is not going to change. So here is my question. If I have no weapons and no objects within reach how can I best defend myself? Maybe the martial arts have something to offer.
Last Post By: Mark Hennebury Today, 5:32 PMI have an opportunity coming up - the roof of my shop needs a new support beam (the 1950’s framing is sagging by almost a foot in the middle). Looks like with the remodel slowdown, I’m going to get a contractor in to do the work, but to do so I need to take everything out of my shop, including...
Last Post By: John Lanciani Today, 2:35 PMI've not used much Poplar in my time woodworking, outside some trim that was going to be painted. I've seen some folks use it as a secondary wood for casework and such. I've been watching a YouTube channel from Engels Coach Shop where wagons and coaches are restored or built from scratch, and in...
Last Post By: dennis thompson Today, 4:55 PMRecently (in the last year,) I have noticed more and more "store brands" disappearing from the shelves. The stores where I regularly shop (excluding Aldi's) now only have Campbell's soup. Walmart has a very limited selection of their in house "Great Value" brand soup. Same goes for oatmeal, only...
Last Post By: Jim Koepke Today, 4:39 PMLightly used set of CBN disks for WorkSharp 3000
- 80/180 CBN Work Sharp Disk
- 350/600 CBN Work Sharp Disk
- 800/1200 CBN
I have two fountains on my patio that GF wants to replace. They were originally 120VAC, but I had long ago retrofitted them with 12VAC pumps to run off
Lee DeRaud Today, 6:01 PMIt was a bunch of fun, powerful and tough to handle, could kick back once in a while, that hurt. don't remember if it was a 4 speed. I mucked around
Mark Hennebury Today, 5:32 PM@Aaron Inami - that makes sense. The first option sounds painful with a cut/adjust cycle. Thank you for the breakdown.
@Robyn Horton - thank
My Hammer K3 does have the scoring option and uses the 2 thin blades and the required number of shims to match up with the main blade. It does also have
Robyn Horton Today, 5:14 PM
Time for some levity
Thread Starter: Dave Anderson NHWith all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Dave Anderson NH Today, 10:33 AM