• Recent Articles

  • Hottest Threads

    Dave Anderson NH

    Time for some levity

    Thread Starter: Dave Anderson NH

    With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.

    Last Post By: William Lessenberry Yesterday, 6:05 PM Go to last post
    jack duren

    Professionals given no credit on forums..

    Thread Starter: jack duren

    Says it all.. I was yelled at for two years in 1983-1985. Got hurt in 1985 on the table saw . Changed jobs and finally work myself up to a foreman..Did this for 37 years. Was on another forum and was told they do not recognize professionals . What does that mean? I did kitchen cabinetry for...

    Last Post By: Edward Weber Yesterday, 1:58 PM Go to last post
    Brian Elfert

    Is the cost of anything not going up?

    Thread Starter: Brian Elfert

    Inflation may be less, but everything still seems to be going up in price. Verizon just increased my cell phone bill by $5 per month. My monthly bills have gone up by at least $200 per month since 2020. That doesn't include the high cost of food. It doesn't help that my wages are 15% less than...

    Last Post By: Dave Zellers Today, 12:29 AM Go to last post
    Josh Baldwin

    Best Shaper Under $5000?

    Thread Starter: Josh Baldwin

    Hey everyone I have a nice router table, but I've been thinking of upgrading to a shaper. I'm thinking 5hp would be ideal, but I'm not sure what other features exactly I should be looking for. There are 3 that seem like a good fit and I'm hoping to get some feedback based on their specs and/or...

    Last Post By: Josh Baldwin Yesterday, 10:16 PM Go to last post
    Edward Weber

    Are your tools dangerous?

    Thread Starter: Edward Weber

    Do you consider tools as dangerous? https://www.popularmechanics.com/home/tools/how-to/g2394/10-workshop-tools-that-can-kill-you/ I came accross this article and it struck me, that I don't consider my tools as dangerous or not. To me it's just a tool. Sure, some tools can cause greater injury...

    Last Post By: Tom Trees Yesterday, 11:52 PM Go to last post
    Connie Freitas

    Router Bit won’t budge.

    Thread Starter: Connie Freitas

    How do I get this router bit out of here? Tug as might, it won’t come out. I tried some WD40 recently but it didn’t help at all. I’ve since read that I’m not supposed to use a lubricant of any kind. So, what do I do please?

    Last Post By: George Yetka Yesterday, 3:01 PM Go to last post
  • Sorby Micro Spindle Set

    I was very excited to fiddle with my new Sorby Micro Spindle Set. I thought I'd put together an article as well.

    I'll start with the blurb from the manufacturer,

    The set features aluminum handles and the following interchangeable blades: a 1/2" (13mm) gouge for roughing down and basic shape and design, a 1/4" (6mm) skew for fine detail, a 5/32" (4mm) beading and parting tool for detailing or parting off and one Allen key.

    Turning fine intricate spindles or just plain, small spindles? The Micro Spindle Set is the right size, with just the right tools for the job. The set features aluminum handles and the following interchangeable blades: a 1/2" (13mm) gouge for roughing down and basic shape and design, a 1/4" (6mm) skew for fine detail, a 5/32" (4mm) beading and parting tool for detailing or parting off and one Allen key. This set is also ideal for pen turners.

    - Anodized aluminum handle
    - 3 interchangeable blades
    - Ideal for pen turners


    Here's a shot of the Spindle set and some extras, Most are there for marking out a pen blank. Next up is a roughly 8 minute video of me turning a small peg with the set. I know it's a bit, but I decided not to edit to show all the steps as tool changing takes place.



    Still with me, good, now for the reviewing part.

    Pros: Sexy handle, I find the color, balance and size of this tool really comfortable. It's responsive to touch and gives really good feedback on your cut.

    I looked at the other accessories for the handle as Sorby says, they all look very well made. I'd be really interested in testing the sprialing tool.

    Fit and finish: the blades are all nicely polished, and only needed a few swipes on a stone to remove small burs. The cutting geometry is great. The set screws also lock down very tightly and don't allow for any movement of the blades.

    Cons: The knurling on the handle is a little sharper than I expected, it's by no means uncomfortable to me or a deal breaker.

    The second thing (which I think potential users will critique) is you have to change blades, well I bought a tool with interchangeable blades, that's kind of a given. From the video you can see it's not an insane amount of time. If you're a hobby guy, no big deal; if you're a production guy, investing in more handles or making some extras may not be a bad idea, or a different set entirely. I'll work with it for a while as is, and see if I start to hate changing tools, then I might thing about making extra handles.

    Here is the finished and waxed cherry peg. It's 1 1/4" long, 3/8" diameter with a 5/16" by 5/16" tenon.


    Overall I think the Sorby Micro Spindle set is a great buy and recommend it, it will work great almost right out of the bag. If you're looking into getting other accessories, I'd suggest getting them with handles, even if you swap out specialty tools like the sanding and spiral attachments I think you'd appreciate having a handle on the gouge and skew at least.