With all of the negativity and political stuff going on with the Covid-19 virus it is time to look at the humorous side of things. Feel free to add more, but keep it clean or it will be deleted.
Last Post By: Kev Williams Today, 7:21 PMI'm looking at getting a pair of bucket hooks: https://www.bxpanded.com/BX-bucket-hooks I like the fact they can be removed when not needed. I will use it mostly for lifting logs and pulling them out of the woods as well as sometimes lifting heavy items. Most of the time I'll use a chain which...
Last Post By: Jim Becker Today, 7:59 PMWe have a manhole in our back yard that goes to a rain sewer. I want to back flush the in ground pool ont the sewer. I can lift the cover every time but what I really want is to have a hole with 1 1/4” sch40 pvc through it so I don’t have to mess with it. I can drill it fairly easily with a...
Last Post By: Bill Dufour Today, 11:04 AMI finally bit the bullet & ordered a SawStop PCS 1.75HP with the 36" T-Glide-Fence the other day from my local Woodcraft store just before the May 3rd. price increase. I really wanted to get the 3HP. model, but I only have one 30-amp 240V circuit available & my dust collector is currently run...
Last Post By: Darrell Bade Today, 8:42 PMI just saw an ad for 7 rusty saws for $25 and I may not be able to resist. One has the thumbhole but broken horn. It might be worth buying the whole lot but I'll have to get better at cleaning them up. I hate the mess. Hopefully someone will buy them before I decide to bite the bullet.
Last Post By: Matt Hunstiger Today, 4:49 PMHad those planks of Ash....four at 7/8" x 5-1/2" x 77" and one at 7/8" x 5-1/2" x 48"......and figured I could try to build a Shaker Style Table, complete with a drawer....I remember way back when, during the New Yankee Workshop days, that Norm built such a table. Have to go strictly by memory,...
Last Post By: steven c newman Today, 8:27 AMCommon masking tape = .005 more or less.
Maurice Mcmurry Today, 9:20 PMThis is a well documented issue with Sawstop. The plywood faces were wonky junk. Loosen the screws and shim with tape. Or, better yet, fab up a new face
johnny means Today, 9:04 PMNice going Wade. Go very easy with heat when soldering and be sure to clean off any flux residue, especially if you didn't use solder intended for electronic
Paul F Franklin Today, 8:48 PMNice haul Rod...RO is my second favorite wood (after cherry).
We had several of Mary's graduating Midwifery students and their families over
Nope. I have 5 DMT diamond "stones" in various grits. I have 3 Shaptons in comparable grits, plus a 6000 grit. The DMTs are a good product,
Frederick Skelly Today, 8:42 PM
vBulletin Message