• Recent Articles

  • Hottest Threads

    Michael Rutman

    Dust Collector recommendations

    Thread Starter: Michael Rutman

    Oh boy, reading the archives I can see this is not a simple question, which makes me feel good because I am completely lost. I have never owned a dust collector mostly due to inability to figure out what I need, and that needs to change. So, let me go over my shop, my needs, and then beg for...

    Last Post By: Jim Becker Today, 3:03 PM Go to last post
    John K Jordan

    NAS recommendations?

    Thread Starter: John K Jordan

    Iíve been trying to educate myself about NAS and have read a bunch of reviews from testers and users. Some have both glowing praise and horror stories for the same devices making it hard for the inexperienced to decide. I read some security vulnerability warnings too. Anyone have...

    Last Post By: John M Wilson Today, 4:56 PM Go to last post
    Bernie Kopfer

    Drilling large deep holes on lathe with forestner dit

    Thread Starter: Bernie Kopfer

    This is a follow up question from a previous link Powermatic 3520b quill problem. I received the new quill and sure enough it moves in and out smooth as can be. So I apparently bent the old quill by attempting to drill a deep( 8") hole x3" Dia in a semi green piece of maple for a vase. I had...

    Last Post By: John K Jordan Today, 11:38 AM Go to last post
    JOEL MONGEON

    Bandsaw for small shop

    Thread Starter: JOEL MONGEON

    Hello everyone, I'm a hobbyist working out of a one car garage (12X19) shop. I have mostly been building up a Festool tool collection with some hand tools thrown into the mix. I've got a Sawstop JSS pro that I use for ripping but am looking to replace that with my first and hopefully last bandsaw....

    Last Post By: Mike Kees Today, 6:43 PM Go to last post
    Ron Hampe

    Laguna vacuum pumps

    Thread Starter: Ron Hampe

    Are they worth buying? They have a 2.5hp (109cfm/3.7"Hg) single phase for $900 and I would need 3 or 4 of those for my 49" x 98" table. By installing these with an isolated zone for each I believe the advantage would be a lower operating costs when cutting smaller parts. They also have a...

    Last Post By: Mark Bolton Today, 2:48 PM Go to last post
    Alan Heffernan

    Do you burnish your scraper?

    Thread Starter: Alan Heffernan

    I have seen this Lee Valley scraper burnisher as well as some homemade tools for this purpose. I would like to know if any of you take the time to burnish your turning scrapers. I suspect you need to hone the top of the scraper and then burnish a hook. Burnishing one fresh off the grinder...

    Last Post By: John K Jordan Today, 11:11 AM Go to last post
  • Recent Forum Posts

    Josh Davidson

    Moving my workshop

    I just bought a new home like a mile away with a much larger garage. I've been having a hell of a time finding a moving company. Most of the specialty

    Josh Davidson Today, 10:11 PM Go to last post
    Scott Davis

    Cabinet update

    Good evening!
    we are looking to update our builder grade cabinets in the family room. They are 20 years old and mostly built with Butt joinery.

    Scott Davis Today, 9:57 PM Go to last post
    Alan Rutherford

    Windows

    All our opening windows upstairs are casements and I guess they're OK but they have their quirks. I don't know what brand we have. The house was was built

    Alan Rutherford Today, 9:44 PM Go to last post
    Tom Bain

    Kumiko

    This is a good first kumiko project (at least for me). I made several as gifts. I think this is a Mike Pekovich project from FW.

    Tom Bain Today, 9:38 PM Go to last post
    Jamie Buxton

    Working With Elm Wood

    I built a dining chair from American Elm. It milled and sanded and glued just fine, and I still have it 20 years later. The one odd thing about the

    Jamie Buxton Today, 9:21 PM Go to last post