View RSS Feed

Most Popular Blogs

  1. Segmented Pen (Part 3)

    (part 3 of 3)




    From this point treat the blank as you would any other pen blank. Here you can see the blank has been put on the mandrel/lathe and has started the turning process.





    After sanding and putting on a cyanacrylic (CA) finish and buffing… Here is the final ...
    Categories
    Uncategorized
  2. Building my custom poker table

    The aprons were up next and it was quick work to milling them to size and then it was adding the decorative touches. I had thought about adding flutes to the outside of the aprons, but decided to go with a walnut band of inlay around the outside instead and that would go nice with the minor walnut inlay that would be inlaid at each intersection of the top segments later in the construction phase.

    ...
    Categories
    Uncategorized
  3. Building my custom poker table Pt.2

    I had had the leg set and the pedestal assembly sitting around the shop for quite a while. It was quick work to drill the holes for mounting the legs to the pedestal. First though, I wanted to make sure that the pedestal was square or else my hole layout for the leg bolts would be off.


    ...
    Categories
    Uncategorized
  4. Plantation Shutters Part 10

    I then reassembled the shutters and did a dry fit just to make sure everything fit.

    Here are the shutters in the closed position (no control bar or hinges... That's coming this weekend.):


    Here are the shutters in the fully open position:



    Here is a view from the outside: ...
    Categories
    Uncategorized
  5. Rocket Launcher II Build (Tool Rack) PICS

    Quote Originally Posted by Scott Hubl View Post
    Project- Rocket Launcher II
    Searching threads I recently came across Ken Whitneys Tool Rack he made in this thread,http://www.sawmillcreek.org/showthre...t=#post1588127 , and contacted him for more info on it. Ken was nice enough to send me more info and pics, he also posted that info and pics here for all to use.> http://www.sawmillcreek.org/showthre...cher-Tool-Rack
     
    The "Rocket Launcher"
    ...
Page 4 of 7 FirstFirst 1234567 LastLast