Shawn Pixley

I learn something new from each project. Usually, it is how not to do something. In this case, I didn't label my pieces as well as I might have, so I ended up with a bit of a mess-up in one joint. Luckily, this is when to do it. In any case here are the two concepts:

Here are the completed views of the arc / leg assembly. First, slightly proud back, proud front.

DSCN1027.jpgDSCN1029.jpgDSCN1030.jpg

Second, Front proud and Back flush.

DSCN1031.jpgDSCN1032.jpgDSCN1033.jpg

When stepping back from the Arc, the leg that is proud on the back interferes with the visual of the arc's curve. I think that I will go in this direction. Next, on to the Prong joint.