I haven't posted on the blog for a while. Between work, travel and a few intervening projects (Guitar, Table, Shoe rack, etc…) I hadn't made much progress recently on the stand. I did cast the hasps and fabricated the pins last fall but didn't take pictures. Well, I sourced the walnut leg material and found some nice straight grained thick QS stock for the legs and started the fabrication. Page-01.jpg I worked up the basic design in Sketchup to explore my ideas. I ...
Well the end seems in sight now. I have a coat of finish on the legs. I also fastened the top handle. So next it was mortising of the hasps and then fashioning the attachment plate. I cut the mortises for the hasps. I rough out with my Dremel set up for inlay and then pared carefully with a chisel to my layout lines. After mortising, I put a coat of finish down to avoid getting finish on the hasps. I had cast the hasps last fall from bronze. That was a bit frustrating as twice I cracked ...
I am down to the part I have been dreading, the inlay. I have always liked the Japanese Brush and Ink Drawings. I travel with a sketchbook, brushes and pens. I found I was interested in this type of motif could be added to a cabinet. Here is a concept sketch. Brush and Ink.jpg I then spent a bit of time scaling this and composing it on the box. Concept.jpg So, I thought I would do a practice panel to ensure I was ...
(Continued) After the fit is good, The leaves are glued in. After they dry, I scrape off the paper. Placing Ebony.jpgCut Ebony.jpgInlay Prior to Scraping.jpg I then cleaned up the surface and shot the edges. A Coat of BLO and let to dry overnight. Shooting Edges.jpgCoat of BLO.jpg Now I need to figure out what to do with the panel. I'm thinking I will re-saw it and make it a door for a ...
Originally Posted by Bill Dufour Will those stairs be covered to keep snow and ice away? Trenchless is the search term to use. Bill D. hmmmm. Very good thought. Last few years hasn’t had much cold weather but I agree with your idea of covering the stairs being beneficial. Thanks!!
Recent Comments