View RSS Feed

All Blog Entries

  1. vintage Craftsman table saw upgrade

    Quote Originally Posted by glenn bradley View Post
    Quote Originally Posted by Mark Mrsa View Post
    Glenn, I had the wrong number. Correct model number is 113.29901.
    This thread may help. Besides Grandpa's 1950 Emerson I had a 1970's "113." contractor. I added a decent fence, PALs, machined pulleys and a link belt. I also wrapped a 90# bag of Redi-crete in plastic and tossed it in the base for ballast.
    Emerson Saw.jpg
    I could get the blade very well aligned at 90 degrees but, as with nearly all contractor format saws, bevel cuts were a challenge.
    ...
    Categories
    Uncategorized
  2. would this shop improvement be "worth it"?

    Quote Originally Posted by Bill Dufour View Post
    Will those stairs be covered to keep snow and ice away?
    Trenchless is the search term to use.
    Bill D.
    hmmmm. Very good thought. Last few years hasnít had much cold weather but I agree with your idea of
    covering the stairs being beneficial. Thanks!!
    Categories
    Uncategorized
  3. Witherby no. 110 block plane

    Quote Originally Posted by Zac wingert View Post
    D1FF67FD-5CB9-4B17-B084-197F837DE16C.jpg

    Here is the box it was in.
    That is a product with the Witherby name and likely nothing to do with the T H Witherby legacy, at least to my knowledge.

    It may be someone who had rights to use the name. It may be the trade mark to the name has become public domain.

    There is also Witherby Publishing, seems to be mostly maritime titles.

    More research would be in order if it is something you have to ...
    Categories
    Uncategorized
  4. New R4512 saw buying experience at Home Depot,first it's bad then it's excellent

    Quote Originally Posted by dennis thompson View Post
    Went to Home Depot on Saturday to buy the Ridgid R4512 saw. Worked with two different associates, both of whom were completely useless, I wanted to make sure the saw was made in 2016, after the trunnion issue was fixed. Left the store completely annoyed with them. I really wanted the saw so I went back early Sunday morning and asked for the manager. It was like I was in a different store, the manager and his assistant were great. They got a fork lift to get the saws down from a high rack, allowed
    ...
    Categories
    Uncategorized
  5. I Can't leave well enough alone - Part 1-1/2

    (Continued) After the fit is good, The leaves are glued in. After they dry, I scrape off the paper.

    Placing Ebony.jpgCut Ebony.jpgInlay Prior to Scraping.jpg

    I then cleaned up the surface and shot the edges. A Coat of BLO and let to dry overnight.

    Shooting Edges.jpgCoat of BLO.jpg

    Now I need to figure out what to do with the panel. I'm thinking I will re-saw it and make it a door for a ...
    Categories
    Uncategorized
Page 1 of 28 1234511 ... LastLast