View RSS Feed

All Blog Entries

  1. Changing seasons, hairy legs, and a chair

    Worthless Dribble:
    Here in the northwoods of Wisconsin XC ski trails are starting to get soft, the birkebeiner has concluded, roads are still too icy to bike, and our dictator (err governor) has managed to divide a pretty easy going population. Perhaps it explains the highest concentration of taverns per capita in the US.
    http://www.flickr.com/photos/littleg...gy/5456929648/

    Might as well use the time between seasons to get cracking on the major project for 2011. ...
    Categories
    Uncategorized
  2. Rocket Launcher II Completed PICS

    Quote Originally Posted by Scott Hubl View Post
    Well I finished up my turning tool rack. "The Rocket Launcher II"

    I still have some arranging to do and I may add some things or remove them but for the most part I have Completed my Turning Tool Organization Project.

    I give you - The Rocket Launcher II, Turning Tool Rack.

    Overall Shot


    Closer Shot
    ...
    Categories
    Uncategorized
  3. Rocket Launcher II Build (Tool Rack) PICS

    Quote Originally Posted by Scott Hubl View Post
    Project- Rocket Launcher II
    Searching threads I recently came across Ken Whitneys Tool Rack he made in this thread,http://www.sawmillcreek.org/showthre...t=#post1588127 , and contacted him for more info on it. Ken was nice enough to send me more info and pics, he also posted that info and pics here for all to use.> http://www.sawmillcreek.org/showthre...cher-Tool-Rack
     
    The "Rocket Launcher"
    ...
  4. New shop - Need advice

    Quote Originally Posted by Ole Anderson View Post
    Can't go wrong with the flexibility of pegboard, make sure to get the 1/4" stuff, don't know if they even sell the 1/8" anymore. For the price of drywall, you can get 1/2" OSB which will take a beating compared to drywall and you can screw stuff to it without looking for studs. I have all three in my shop, even have OSB painted and unpainted. Either works fine. Pegboard on the bottom half wouldn't get my vote. Insulating the walls?
    = Ole, not sure what you recommend - did insulate ...
    Categories
    Uncategorized
  5. My Shakashima Media Cabinet Conclusion Part 2

    Before fastening on the top, I applied finish to everything - the cabinet, the shelves and the top. I rubbed on two coats of shellac, sanding with 220 grit lightly between each coat. Then I applied an oil/ urethane by hand, sanding with 220 between each coat. After the second coat of oil/urethane, I attached the top and applied the third coat. Once dry, I buffed the finish out with 0000 steel wool, installed the door knobs and hung the adjustable shelves.

    Here's the finished project. ...

    Updated 01-28-2011 at 1:23 PM by Ben Arnott

    Categories
    Uncategorized
Page 9 of 28 FirstFirst ... 567891011121319 ... LastLast