View RSS Feed

All Blog Entries

  1. Recommendations for Next Tool

    [QUOTE=Mike Heidrick;2068200]dust collector - real one with decent filter. BEFORE a drum sander.[/QUOTE

    I'm with Mike, I'd put the money towards dust collection and also an air filtration system.

    Good luck with it.

    PHM
    Categories
    Uncategorized
  2. DIY air filtration unit for <$200

    I thought I would add this to my blog since so many have asked about it in the past (and it takes me a while to find it again):

    Quote Originally Posted by Dan Hintz View Post
    As payback to the lasering community, I'm sharing my "plans" (such as they are) for everyone to copy. Well, not so much "plans" as pictures of the completed unit, but it should be obvious how to recreate something similar.

    Due to poor planning on my part and a lack of any real sleep, I made one or two errors in the construction
    ...
    Categories
    Uncategorized
    Attached Thumbnails Attached Images
  3. Finishing the race...

    Let me start by saying that finishing isn't my favorite activity. Unfortunately, when I have tried to hurry this, I have regretted it. So this was a lesson in patience. My shop is my garage and we still park cars there, so I would finish this up in the room where it will stay. The piece is so massive that I would finish the pieces in stages building up from the base. I have been increasingly happy with oil / varnish mixtures wiped on with many light coats. I particularly like the textures that are ...
    Categories
    Uncategorized
  4. Details, details, details...

    After the completion of the main portion of work, I find it easy to fall into the trap of, "let's start finishing." There were still a number of details and small components left to be part of my concept. One of the design intents was to draw the eye up to the glass display cabinet. Therefore the pulls needed to be a bit more special than the drawer pulls below. I experimented with casting some bronze in Cuttlestone.

    IMG_0868.jpgIMG_0871.jpg ...
    Categories
    Uncategorized
  5. Recovery Part II

    I hate it when I find that I made a mistake weeks ago. I had improperly calculated the spacing for the dust guards. Before I could fasten my applied fronts I had to relocate my under mount glides. So once again doing fiddly work laying on my side and working in cramped space. I had also fabricated my drawer pulls weeks ago when waiting for glue-ups to dry. I rectified the glides and fitted the drawers. A day's work but seemingly infinite trips up and down three flights of stairs. While gluing the ...
    Categories
    Uncategorized
Page 3 of 28 FirstFirst 123456713 ... LastLast