Recently i was setting up my incra 2000 miter gauge to cut some small pieces(one inch) at the widest on 15 degree ...when i notice my fingers weren't all that comfortable with the distance to the blade. after 70 plus years i've become accustom to the balance of 10 fingers ..does anyone have any suggestions for a hold down for this Incra Bill
Steve, We have a Epilog 45 watt mini and 3 Melco Amaya embroidery machines. If you look at the photos, and if I were to embroider that design the number of stitches would run the cost up to around $100 for the sweatshirt, plus it takes alot of time to stitch out a large design. (remember how thin a thread is) Now if I use the twill instead of stitching, the same sweatshirt will run around $40.00. The Sports Twill comes in PSA and PSA PERM. The PSA would be used if I wanted ...
Archive
Recent Comments
