Don Gares
12-25-2008, 6:47 PM
Thought maybe my poetic title just might get some attention even on Xmas night.:)
Anyway, later tonight I plan on cutting and engraving some 1/8" mirror acrylic and I have never done this before. My primary concern is with the cutting (vectoring) as I assume that I can engrave the back of it with somewhat similar settings as I use on glass mirrors.
I am using a 40 watt laser and any information about vectoring this material such as speed, power, PPI, which side up, paper on or off, etc. would be greatly appreciated.
Merry Christmas,
Don
Anyway, later tonight I plan on cutting and engraving some 1/8" mirror acrylic and I have never done this before. My primary concern is with the cutting (vectoring) as I assume that I can engrave the back of it with somewhat similar settings as I use on glass mirrors.
I am using a 40 watt laser and any information about vectoring this material such as speed, power, PPI, which side up, paper on or off, etc. would be greatly appreciated.
Merry Christmas,
Don