John Longwitz
03-14-2003, 3:48 PM
Fellow at work told me about a metro Atlanta place I'd not heard about. I checked it out today and they have a pretty good line of stuff. Bought a 3/4" x 4" x 48" piece of UHMW. Prices are good and they have Kreg screws and kits, all kinds of T-track and tons of fixtures for it. Mirka sanding products, Freud blades (including the LU series), lots of drill and router bits, Shop Fox cabinet saw. They also have a website at http://www.ptreeusa.com Some of Y'all may want to check it out. Right off I-85N. Take Oakcliff west and turn left on Oakcliff Ind. St., which is just past the light where Northcrest turns into Oakcliff, and turn right into the first parking lot. It's down at the far end of the building.