john welsh
12-22-2008, 8:43 AM
my legend ext 36 is having a mental breakdown i think ? or is it me?
after finishing an engraving the head fails to reset to the home position preferring to go to the back of the machine and stop 3/4s of the way back towards top left.
if i reset the home position from the control panel via the maintainance control option it resets fine .
but engrave or vector cut another job and the same thing occurs.
ive cleaned the dust from the motors the belts the cables and the encoding strip to no avail so if any one has any ideas please let me know , im still waiting on a call from epilog support .:confused:
after finishing an engraving the head fails to reset to the home position preferring to go to the back of the machine and stop 3/4s of the way back towards top left.
if i reset the home position from the control panel via the maintainance control option it resets fine .
but engrave or vector cut another job and the same thing occurs.
ive cleaned the dust from the motors the belts the cables and the encoding strip to no avail so if any one has any ideas please let me know , im still waiting on a call from epilog support .:confused: