Brian Brown
12-12-2008, 10:00 PM
So........ I was making the first ornament of the year last night. You know me, I don't like to wait to the last minute for these kind of things. :rolleyes: I had just finished sanding the interior, and was ready to part off, and glue the handle. Just as I was read to start the cut, I heard a loud crack, and the ornament went flying in pieces. 2 pieces to be exact..... very exact..... so exact that the pieces were almost perfectly symetrical. I sanded one piece to see how much was necessary to take off to make it flat. Answer, almost nothing. Here are the two halves.
103488103489
Bet you can't figure out how I am going to recover from this one. I have never seen a break so clean or straight before. This is cedar and if the glued in contrast stripe works, it will have a purple heart handle. Besides Purple heart, what species do you think would work well as a contrast stripe? Something soft like cedar, so I don't have such a mismatch when I re-turn and sand (purple heart is hard as concrete).
103488103489
Bet you can't figure out how I am going to recover from this one. I have never seen a break so clean or straight before. This is cedar and if the glued in contrast stripe works, it will have a purple heart handle. Besides Purple heart, what species do you think would work well as a contrast stripe? Something soft like cedar, so I don't have such a mismatch when I re-turn and sand (purple heart is hard as concrete).