Need slot for router fence slide

[Howard Miller]

My router table fence has T-slot type slide attachments that are larger than the normal T-slot. The base width is .927 inches; top width is ~.75 inches and height is .324 inches.

I need a track for this to install into my router table.

Any ideas on where I can get one?

See the attached pictures>

[Ron Bontz]

Hi Howard. I believe what you have in the pic. will fit a standard T slot in a cabinet saw or shaper. Yes? If so then you might try "might-T-track" inc. or Peachtree. I bought some matching T-track and guide from Peachtree some time back. 4' lengths to make an auxiliary shaper fence out of oak using this stuff. Worked great. Also worked well for my new router table miter slot. It will accept a standard miter gauge with the T. Best of luck. :)

[Howard Miller]

Ron, that is what I am looking for. Thanks for your help with this.