View Full Version : Second hand machine :tips
ian stewart
12-01-2008, 3:48 PM
I am getting a second hand machine this week
It is going to be demonstrated to me
Any tips on what I should look out for
Ian
Brian Robison
12-01-2008, 3:57 PM
Technical Support!
Allen Isakson
12-01-2008, 4:17 PM
what kind of machine are you getting. How old...There are many many questions when buying a used machine but haveing excellent tech support is critical.
Mike Null
12-02-2008, 6:20 AM
Find out if parts are still available; especially the tube. What kind of pc interface does it have and what kind of software will it use?
ian stewart
12-02-2008, 6:27 AM
The machine is Chinese
3040 bed, upgraded to 60W laser only 2 hours use
PCI interface lasercut 5 software
wish to cut plywood upto 10mm
I wish to use corel X4 for design and input
I intend to have a dedicated PC running XP connected to laser
Ian
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.