PDA

View Full Version : Laser Match?



Ross Lowry
11-30-2008, 8:21 PM
I noticed on Epliogs you can adjust the laser match from -20 to +20.
Does anyone know what this does?
Thanks

Frank Corker
11-30-2008, 8:34 PM
Ross you should go to the epilog website and download the pdf manual for your model


Laser Match Stop + Job Range: -20 to +20
Establishes the left to right vertical
alignment of alternating raster lines.
Stamp Match Stop + Focus Range: -20 to +20
Establishes the left to right vertical
alignment of alternating

it's the area I would call - don't fix it if it ain't broke

Ross Lowry
12-01-2008, 9:00 AM
I agree Frank, don't fix what isn't broken.
I was just curious as to what that was.
Thanks

Roy Brewer
12-02-2008, 11:14 PM
you can adjust the laser match Ross,
Frank's advice is very sound.
Nevertheless to satisfy your intellectual curiosity, we're matching the left raster motion to the right raster motion. Every laser tube has an attitude; we make adjustments to this so that the laser beam is fired in such a way that the beginning of the mark in one direction starts precisely where it ended going the other direction.
HTH