how to question

[fred woltersdorf]

i would like to make a table similar to the one in the picture. my question is how would i make the upswept breadboard ends? i have a bandsaw but it's not capable of making a large cut like that. i thinking of some kind of handplane with a concave blade or a chisel and sanding or doing a cove cut on the table saw. the table is appox 14" in sq. thanks.

[Bill Arnold]

I'd do it with a cove cut on the tablesaw, making it the combined width of the two ends, then slice it in half. Plane the underside to shape it.