Boilermakers Logo

[Russ Reaney]

I was wondering if anyone had any vector art of the International Brotherhood Of Boilermakers Logo, I was asked to put it on glass for a christmas gift, I am thinking this will be the best way to engrave to glass. any pointers will help. using corelDraw 12, laserPro 30 watt laser
Thanks

[Frank Corker]

As it happens I do.

[Frank Corker]

I don't know what your settings are going to be with your laser but just check through your manual it will give you a good starting point. When you get your glass ready, put some washing up liquid over the area and put a single piece of wet newspaper over it. This will keep the glass fracturing to a minimum and it will leave a nicer soft image. Once you have finished engraving, rub one of those synthetic scouring pads across it to remove any little sharp glass fragments.

[Russ Reaney]

Frank:
Thank you for your cdr. file, but for some reason I can't save or open it.
I use corelDraw 12, Not sure why it will not work:confused:.
Any idea's Thank's in advance

[Frank Corker]

Here you go

[Russ Reaney]

Frank;
As usual you are the example that this form was built for, So glad you’re here. A great big thanks.