Martin Rock
11-26-2008, 1:25 PM
Hi
I am in the process of choosing the boards for my current chest of drawers project and I have some questions about face gluing stability. I have done face lamination before when I only had 4/4 lumber. Like face gluing 3/4 boards to make legs, bench stretchers, sawbench saddle and never got stability problem but in these cases the pieces where assemble shortly after.
I am a little worried about the stability of thinner boards face laminated to be used for furniture top or frame panels.
Can one face glue two 3/8 thick boards to make a 3/4 inch thick boards that could afterward be used for making a laminated top. If so, that would permit me to have bookmatched patterns and save nice figured wood for the top layer only.
I would also like to know if the boards needs to be the same thickness or could one face glue a 1/2 board with a 1/4 board (or even two 1/4 boards for frame panels)?
Finally does the end ring orientation matters?
I know I could do veneering but would prefer not to if possible
thanks
Martin
I am in the process of choosing the boards for my current chest of drawers project and I have some questions about face gluing stability. I have done face lamination before when I only had 4/4 lumber. Like face gluing 3/4 boards to make legs, bench stretchers, sawbench saddle and never got stability problem but in these cases the pieces where assemble shortly after.
I am a little worried about the stability of thinner boards face laminated to be used for furniture top or frame panels.
Can one face glue two 3/8 thick boards to make a 3/4 inch thick boards that could afterward be used for making a laminated top. If so, that would permit me to have bookmatched patterns and save nice figured wood for the top layer only.
I would also like to know if the boards needs to be the same thickness or could one face glue a 1/2 board with a 1/4 board (or even two 1/4 boards for frame panels)?
Finally does the end ring orientation matters?
I know I could do veneering but would prefer not to if possible
thanks
Martin