View Full Version : Jewelry box inlay top
seaver dave
11-23-2008, 8:43 AM
I'm searching for a jewelry box top inlay design which is shown on the Universal laser website. Similar to a celtic rope knot that is about 1/2 inch from the outside dimensions of the box cover. If anyone has a file or a website that I could obtain more info, I'd appreciate the help.
Thinus Rabie
11-23-2008, 11:54 AM
Dave not sure what it looks like, but hope that this will help.
Frank Defert
11-23-2008, 12:15 PM
Thinus,
Could you please post it in version 12 or lower so I may see too.
Thanks,
Frank
Rudy Ress
11-23-2008, 12:35 PM
Hi Frank. Here it is in Version 10, just in case other have a lower version of CD.
Frank Defert
11-23-2008, 12:40 PM
Rudy,
I opened it and I am still getting a blank screen like when it's too high a version of corel?
Frank
Rudy Ress
11-23-2008, 12:45 PM
Frank the celtic rope is actually off of the page on the original. Change the zoom factor to view.
Thinus Rabie
11-23-2008, 3:42 PM
Hope this works , but here it is anyways!Version 10.
Frank Defert
11-23-2008, 8:18 PM
Thanks Thinus, now I've got it.
Rudy I still was unable to find it in your post and I was all over the screen ?
Thanks guys for all your help.
Frank
Mike Ireland
11-24-2008, 11:42 AM
I'm not sure what picture you are seeing on the website but here are some that I have used in the past for CD covers.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.