View Full Version : Vector Cut Gages for Laser or CNC

Keith Outten
11-22-2008, 7:44 AM
Attached are four Corel Draw files that some may find useful.

The French Curve you can cut in any size, large curves are very handy in any workshop. I have cut several of these on my ShopBot CNC router from acrylic that were huge. Given the price of acrylic sheet large french curves can get quite expensive to make.

The Circle Jig is a ready to vector cut router jig for cutting circles and arcs.

The circle guage Aaron and I created as a shop jig to lay out circles, arcs and angles for projects up to a ten inch radius. You may use this guage as you see fit as long as the design credit is given to SawMill Creek Woodworkers Forums.

The SMC ruler is a carpenters square that can be vector cut from acrylic, wood, etc and customized as necessary. I have used these as business cards in the past, people don't ever throw them away, they are very useful and your contact information will always be on their desk or workbench.


Peter Meacham
11-22-2008, 8:06 AM

Wow - very, very useful tools for the workshop - thanks much.


Bob Cole
11-22-2008, 10:11 AM
Those are great Keith. Thanks for sharing.

Scott Perry
11-22-2008, 11:32 AM
Thanks Keith.

Bob Keyes
11-22-2008, 1:56 PM
Thanks Keith. These are great tools!

Phil Garcia
11-22-2008, 2:43 PM
Thanks Keith, those are great. I already produced the square, and it turned out really nice. Thanks again.:D

Skip Weiser
11-22-2008, 3:32 PM
Thank you Keith! Great files, thanks for sharing them.