Lisa Luciano
11-18-2008, 2:19 PM
Hi Everyone,
I volunteered to help our local school with a fundraiser.
They want to engrave each 1st grade child's (printed) signature on the front of a wooden (oak) box.
I made sure the wood panel (20x34) will fit into our laser, and the wood engraves well. I have sheets made up for each child to enscribe their name, but I'd like to know what you think the easiest method would be to scan the signatures and group them together in one file to engrave?. We use Corel Draw X3 by the way.
Has anyone done something like this before?
Thanks for your suggestions. I really appreciate it!
Lisa Luciano
I volunteered to help our local school with a fundraiser.
They want to engrave each 1st grade child's (printed) signature on the front of a wooden (oak) box.
I made sure the wood panel (20x34) will fit into our laser, and the wood engraves well. I have sheets made up for each child to enscribe their name, but I'd like to know what you think the easiest method would be to scan the signatures and group them together in one file to engrave?. We use Corel Draw X3 by the way.
Has anyone done something like this before?
Thanks for your suggestions. I really appreciate it!
Lisa Luciano