Tired today!

[Joe Pelonio]

Last night was the installation for all new signs at a 4 level parking garage, which had to be done after hours since many of the 75 signs were overhead in the path of traffic. I did have one helper, thankfully, but it still took from 9pm to 4:30am to finish. Unfortunately we ran into a lot of rusty bolts on the old signs, and many had been installed with concrete pins that were a pain to remove. Naturally there were no outlets to be found so all of our hammer drill work had to be done with an inverter connected to the truck battery. I'm looking forward to going to bed early tonight!

[Stephen Beckham]

Joe,

Gives a whole new meaning to 'time-and-a-half' doesn't it!!!!

[Scott Shepherd]

All metal signs Joe, or did you make them from something else?

That's a lot of signs to install in that short of a time period.

[Joe Pelonio]

All metal signs Joe, or did you make them from something else?

That's a lot of signs to install in that short of a time period.
Most all of them were 3mm dibond, but the speed limit signs were
3mm sintra sheeted with reflective.